How to Fix a blind

Fixing a shutter, when to replace an old lama

Most blinds are put in the houses are made of PVC. A fault is often present this kind of material is the deterioration of the blades over time. Change is not too complicated, get yourself a new blade and follow these steps:

• The first is to unscrew the blind box and lower caps so you can pull the blinds up. When you were, deploy them far away is broken and all the slats that are below. Once done, replace the blade into disrepair by the new and set the shutter, ensuring it is level.

• The next step is to collect the rotating roller shaft and aligning the blades well. You may need help at this time, since the blind can be somewhat heavy. Someone can hold, while you place the blades properly. Now you can re-enter the blind in your lane. Do not forget to properly close caps and cap. Your blind is now ready.

Fixing a shutter, when changing the tape

Another common problem is to break the tape that we can raise and lower the blinds fall, causing it to stay. To repair it will need a screwdriver, a drill, a couple of screws and nails, and a piece to hold:

• As in the previous case we first need to do is remove the lid of the drum. After the tape will fix a nail into the top of the collection mechanism to release the shutter without the shaft is in constant motion.

• When we have everything prepared and we release the tape the bottom and took the blinds pulling us over. The next thing is to remove the damaged tape, making sure you have properly secured the blind.

• Since we just hook the new film, introducing the metal tabs into the slots axis. At this point, we can move to close the box and return to use our normal shutter.

With a little time and a few fairly basic materials we can learn how to fix a shutter and thus extend its life. Although this type we like classical, new trends in decoration we offer a wide range of colors for this model, which will make the rooms bright and original places. It just depends on our personal tastes.